New York City wants lithium-ion e-bike batteries to be stopped at the border when they don’t meet national safety standards after rash of deadly fires::After a series of deadly fires.
New York City wants lithium-ion e-bike batteries to be stopped at the border when they don’t meet national safety standards after rash of deadly fires::After a series of deadly fires.
We really need a better battery technology, one that doesn’t trivially become an incendiary device.
There has actually been a ton of progress with this over the last decade.
However, everything we have discovered so far either can’t hold as much energy, has really limited charge cycles, or is far too expensive to use at scale.
Ton of progress?
I would refer to that as “research ongoing but no progress yet”.
Current 18650/21700 Li-ion cells are a lot safer than they were 10+ years ago, less chance of thermal runaway and fires now.
The big problem is the higher the energy density the greater the release of energy in a catastrophic failure. For example if you were to increase energy density ten fold, then the release of energy due to catastrophic damage to the battery would be ten fold. Materials aren’t even in the consideration, it’s going to be an explosion.
We’d certainly welcome an EV battery that weighs greatly less, but safety is always going to be a forefront issue only by the physics of energy storage.
Still there needs to be a lot of improvement. I think the weight issue is the outstanding one. Higher energy density and greater longevity would certainly be welcome, but I think safety will always be skirting the edge. It’s not been a fast track toward these goals, but it’s still come a good way. Unfortunately I expect lithium-ion technology to hit a wall sooner than later.
trivially it is only when not built or used properly.
We also have gas heating, electricity, cooking with boiling water etc. that all “trivially” become sources of severe injury and death and we manage. Because stuff is built and used according to standards most of the time.
Home gas & electric installations are a lot safer today than they once were. They’re actually a great example of how a dangerous power source can be made a lot safer through better choices and engineering.
The first gas ovens and heaters used coal gas, which is carbon monoxide and hydrogen. The monoxide meant that coal gas was highly poisonous to breathe; and both monoxide and hydrogen are odorless — so you might not know the oven was left on unlit and killing your family.
Modern natural gas is mostly methane, with an unpleasant scent added so we can detect leaks. Methane is unbreathable, but still a lot safer to have in your house than monoxide!
(To be clear, the monoxide was not a contaminant; it’s a fuel. Coal gas burns into carbon dioxide and water, just like methane.)
So here, we got a better gas technology: in fact, we got a whole different gas; a fundamentally safer-for-humans one — and on top of that, added an extra safety mechanism in the form of an odorizer, making the gas stinky instead of odorless.
Same goes for electricity. Modern home electrical outlets are grounded, greatly reducing the chance of a dangerous shock due to a wiring problem or a defective appliance. And modern circuit breakers are much more reliable than the fuses they replaced; and they don’t break, so the homeowner doesn’t have an incentive to defeat the safety device the way folks often did with fuses.
And modern kitchen & bathroom outlets have GFCIs, so an appliance shorting out through water (or your body) will break the circuit.
So here, we’ve gotten better electrical technology too: grounded outlets, circuit breakers, and GFCIs all make electricity much safer than when it was first installed in homes.
To put it morbidly: Coal-gas ovens and ungrounded electrical appliances were both once common means of suicide. Their modern replacements are safe enough that they don’t work for that anymore. Same goes for cars, by the way. Modern gasoline cars don’t put out enough monoxide to kill a person rapidly by inhaling the exhaust.
So yeah, I think it’s perfectly reasonable to say we need a better battery technology, ideally one that doesn’t do this sort of thing.
Indeed we certainly need a better technology, or to enforce better regulations, but currently those batteries are the only alternative to gas. So we try and learn from our mistakes, as usual…
Modern electric wiring is grounded and has a proper safety switch if and only if the installation is done correctly. In the same wake your gas pipes in the house are safe if and only if installed correctly and burning appliances like a water heater are only safe if and only if regularly inspected and maintained.
The same is true for Lithium Ion batterys. The technology is not inherently unsafe, in the same way that house installations arent inherently safe. It is merely that the shitty ones and their chargers are not produced following the existing standards on how they need to be designed and maintained and for house installations there is inspectors and other means to enforce standards.
The city forbidding the import of these is the same as them having inspectors to make sure buildings are built according to code.
Here is an alternative Piped link(s): https://piped.video/watch?v=nFgXFIa8luY&t=282s
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source, check me out at GitHub.
From 1980 to 2018 they say vehicle fires decreased by 60%.
That is done by regulation and holding companies accountable for their products. The issues arise from low cost products from shit companies.
People hate inconveniences like regulations because they make prices higher, but security is never about convenience.
We need to stop fining companies miscule amounts and ban imports from companies that don’t meet stricter regulations. It isn’t going to cost $5 dollars for junk you throw away after one time use if we do that. Users will pay more for a higher quality reusable product under those regulations as well.
Safter and less e-waste.
I mean shit, why are 1 time use disposable electronics even allowed? E-cigarettes you toss instead of swapping a cartridge are a quick one that comes to mind. Apparently people get mail/advertisements in the mail now that have some sort of lcd screen so they can play a video. So you just chuck a battery and screen when you open your mail. That’s disgusting. (Amazing how far the tech has come, but still)
It seems to me that one simple (and therefore probably wrong) solution to e-waste would be to have retailers, distributors, and manufacturers accept nonworking or obsolete devices for responsible disposal or recycling.
Turn the one-way supply chain bidirectional. If you sell it, you’ve gotta take it back when it’s broken. If you have an assembly line for making it, you can make a disassembly line for taking it apart. If that’s expensive, well, apply some ingenuity to making it cheaper.
Want to deal with fewer broken devices? Make devices that don’t break so much.
There are solutions for battery safety with Li-Ion battery types. It’s just these cheap products are not using them. They use the cheapest batteries which also have the least safety. Then they use the cheapest charging components which again increases the hazard. Charging faults are a common cause of Li-Ion battery fires.
Safer Li-Ion battery types are commonly used, but may be heavier and/or more expensive. For example the safest Li-Ion battery is the lithium iron phosphate type (known as LiFePO4). It’s quite safe against fire, but it’s heavier and more expensive. Next safest is the lithium manganese iron phosphate type (known as LMFP). It’s considerably safer and still has the weight advantage, but more expensive. That type is used a lot in cars and home energy solutions.