I’ve been trying Tumbleweed for my gaming needs and so far it seems to be working relatively well. My issue is about removed packages. When I first installed TW, I removed quite a few packages I did not want (KSudoku, LibreOffice, and a few others). It has been a little since I’ve turned on my PC but yesterday I noticed that KSudoku, LibreOffice, and really all other apps I thought I had uninstalled (sudo zypper remove <package-name>) were back on my desktop. I thought “maybe I forgot to uninstalled them in the first place” so I went through and removed all the unwanted stuff again. Since it had been awhile I updated my OS right after uninstalling those packages. After the update (sudo zypper up), I rebooted and immediately noticed that all those packages I had just removed were back (AGAIN). So WTF… am I not removing those unwanted packages “properly”? Why do they keep coming back after updates? How can I prevent this?

  • Agualusa@lemmy.world
    link
    fedilink
    arrow-up
    12
    ·
    7 months ago

    Open Yast and mark those packages as taboo. That way they’ll never reinstalled again after an update. Use zypper dup for updating tumbleweed. The zypper up its for updating openSUSE leap.

    • lal309@lemmy.worldOP
      link
      fedilink
      arrow-up
      2
      ·
      7 months ago

      Took me a bit to see these patterns/packages (mainly because I’ve never used Yast). I can see these patterns and the software that they install, is it better to use Yast to remove the packages and the patterns and mark them as “Don’t install that sh.t again” or through cli?

      • Ephera@lemmy.ml
        link
        fedilink
        arrow-up
        3
        ·
        7 months ago

        Should not matter, whether you use zypper (CLI) or YaST. They use the same backend code (ZYpp).

      • BCsven@lemmy.ca
        link
        fedilink
        arrow-up
        1
        ·
        7 months ago

        Yast2 Gui GTK just makes it easier because you can click on the games pattern to toggle delete, update, lock, etc

  • Fredol@lemmy.world
    link
    fedilink
    arrow-up
    7
    ·
    7 months ago

    This is the most annoying thing about TW. You gotta do “zypper dup --no-recommends”

    • ashaman2007@lemm.ee
      link
      fedilink
      arrow-up
      3
      ·
      7 months ago

      Right… does it even make sense that installing all recommended packages is the default zypper behavior? Lyx for example will install a 2GB Tex distribution by default, which will conflict with any existing Tex install. Why on earth is that the default… If you are installing Lyx, you very likely at least understand that you need to choose a Tex distribution.

  • banazir@lemmy.ml
    link
    fedilink
    arrow-up
    6
    ·
    7 months ago

    Always check the package list when updating. Tumbleweed for some reason occasionally wants to install Patterns even if they were not included to begin with. I’ve taken to updating with the command:

    sudo zypper dup --no-recommends

    to avoid installing packages/patterns I’m trying to avoid. You could probably also mask some packages so they are never installed, but I haven’t looked in to that.

    Hope that helps.

  • Frellwit@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    7 months ago

    OpenSUSE use patterns. Groups of packages that can be selected during installation. If one of the included pattern packages is removed it will be “fixed” when updating. You can uninstall some patterns, but be careful as some may be more important than others, leaving you without a graphical interface or something like that. If you decide to do a reinstall, you can deselect a lot of patterns (search for “pattern” in the software selection section of the installer).

    • lal309@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      ·
      7 months ago

      Okay so I ran sudo zypper search pattern* and found one called patterns-games-games and patterns-office-office. I assume these are the “patterns” responsible for installing stuff like Kmines, KSoduku, LibreOffice, etc which I don’t want. I also assume I can run sudo zypper remove patterns-games-games to remove it all? Or do I need to remove the packages individually and then remove the pattern?

      • FrostyPolicy@suppo.fi
        link
        fedilink
        arrow-up
        3
        ·
        edit-2
        7 months ago

        If you taboo a pattern it and the packages it would install will never be installed automatically. I tend to taboo those games patterns.

      • FrostyPolicy@suppo.fi
        link
        fedilink
        arrow-up
        1
        ·
        7 months ago

        Removing a pattern doesn’t unfortunately remove the packages it installs. Only the pattern “package” is removed.

    • lal309@lemmy.worldOP
      link
      fedilink
      arrow-up
      2
      ·
      7 months ago

      Well when I boot after reboot, I see updated software packages and running uname-a shows the new kernel zipper said it was going to install. Based on that I assume that the answer would be no

      • Rustmilian@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        7 months ago

        Check your install paths when you uninstall them. Do the files from the packages still exist?

  • 528491@lemmy.one
    link
    fedilink
    arrow-up
    1
    ·
    edit-2
    3 months ago

    Patterns almost made me skip opensuse, until I locked most of them so they won’t annoy me anymore. I start with only selecting some basic patterns in the installer:

    apparmor      
    base          
    documentation 
    enhanced_base 
    minimal_base  
    sw_management 
    x86_64_v3 
    

    When installed, I run this in my fresh system:

    # save the currently installed patterns in a variable
    installedPatterns=$(zypper se --type pattern --installed-only | grep -E "(.*\|){3}" | cut -d'|' -f2 | tail -n+2)
    
    # lock every existing pattern
    sudo zypper addlock --type pattern $(zypper search --type pattern | grep -E "(.*\|){3}" | cut -d'|' -f2 | tail -n+2)
    
    # lock every package starting with "yast"
    sudo zypper addlock yast*
    
    # unlock the patterns you had installed
    sudo zypper removelock --type pattern $installedPatterns
    

    Pro:

    • Only real dependencies get installed when adding packages
    • Nothing re-installs because it belongs to an installed pattern
    • No need for --no-recommends

    Con:

    • You have to find out the packages you need yourself

    For a minimal gnome install, use these packages (likely some more depending on you setup):

    avahi
    evince
    flatpak
    fwupd
    gedit
    gnome-calculator
    gnome-disk-utility
    gnome-keyring
    gnome-session-wayland
    gnome-system-monitor
    gnome-terminal
    gnome-tweaks
    gnome-user-share
    gparted
    gtk2-metatheme-arc
    gtk3-metatheme-arc
    gtk4-metatheme-arc
    libqt5-qtwayland
    loupe
    MozillaFirefox
    MozillaFirefox-translations-common
    pipewire-pulseaudio
    qt6-wayland
    sane-airscan
    simple-scan
    tpm2.0-tools
    wireplumber-audio
    xdg-user-dirs
    xdg-user-dirs-gtk
    

    Bonus tip: When removing software, use the -u flag for less bloat being left behind:

     -u, --clean-deps
           Automatically remove dependencies which become unneeded after removal of requested packages.
    
  • ThyTTY@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    7 months ago

    I believe OpenSUSE uses something called “meta” packages that contain a bunch of other packages. For example if there’s games-meta package it will fetch a bunch of games and during update it may try to install them again. Search through installed packages and see if you have any meta ones.