• givesomefucks@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    4 months ago

    You can get rugged or smooth.

    Lots of expensive brands prioritize smooth because their buyers will buy often and not care about resale or cost of new.

    A Toyota Hilux and a Range Rover aren’t really made with the same priorities, even though both could go offroading.

    Someone that buys a brand new off the lot beamer likely isn’t planning to still own it 120,000 miles later. Probably not even three years later.

    • DebatableRaccoon@lemmy.ca
      link
      fedilink
      arrow-up
      4
      arrow-down
      1
      ·
      4 months ago

      Doesn’t mean we should open a revolving door to the scrap heap. Also this perception of pick one is extremely false. It’s more than possible to have a perfectly smooth transmission than can be maintained. Fill and drain plugs don’t effect any of the internals so it’s little more than self-sabotage (see: planned obsolence) to make it impossible to perform basic maintenance. Besides, no trans is going to remain smooth if the fluid isn’t replaced frequently.

      • givesomefucks@lemmy.world
        link
        fedilink
        arrow-up
        1
        arrow-down
        2
        ·
        3 months ago

        If we were only talking about a transmission sure

        I don’t how anyone would think that’s what I meant. But here you are.

        • DebatableRaccoon@lemmy.ca
          link
          fedilink
          arrow-up
          2
          arrow-down
          1
          ·
          edit-2
          3 months ago

          I think the problem might stem from the fact you specifically responded to my example of a transmission. You see, the subtle nuance of an example like I made is that it’s still transferable.

          What you may have missed in my spiel about an industry leader going out of their way to enshittify their products, effectively creating scrap-ready vehicles, no matter the price tag category, is maintenance is a crucial requirement in helping the longevity of a product, thus meaning less products going to the scrap heap (or landfill, if we’re honest). I’m using cars as an example because it happens to be one of my areas of expertise that happens to be an every-day item for a large quantity of people. However, the example is just as applicable to inkjet printers that clog up, rendering them useless, mobile phones that have limited lifespans thanks to non-replaceable batteries (as well as plenty other components), laptops with similar problems, and pretty much every form of manufactured e-waste you could ever think of. There’s no good reason any product shouldn’t be repairable or have some means of making it last as long as physically possible before it simply doesn’t make sense to do so anymore and it just so happens the automotive market serves as a terrific example of a multitude of little ways manufacturers have been slowly cutting away at reparability to the point that even a trained mechanic can’t repair something without some insanely expensive equipment or still needing to resort to needing to take the vehicle to a dealer to have a certain component flashed to the car before it can be used. So no, we’re not only talking about a transmission but you have fun with that thought while the rest of us have a real conversation that uses anecdotes and stand-ins to discuss a terrifyingly huge problem this world is facing.