They started installing poles along a main road near where we live and I’m not sure what the white antennas on them are for. Some of the poles have traffic cameras like the one in the picture but others don’t. They are spaced every half to one mile and have antennas on opposite sides, with what looks like a radio cabinet near the base. The antennas are all aligned along the road, pointing parallel to traffic. This is in southwest Pennsylvania.

  • borari@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    3
    ·
    2 months ago

    No bro. A mesh network is a bunch of access points that repeat each others signals. This is like a single cable, but using RF. It is not an access point.

      • computergeek125@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        2 months ago

        This is the wireless equivalent of a single Ethernet cable. if you follow each of the dish pairs in a roughly straight line, you will hit another transceiver. This pole would be middle three nodes of this:

        (Air Fiber) <-------> (Air Fiber) (switch) (Air Fiber) <--------> (Air Fiber)

        Camera could also be plugged into the switch.

        And yes, if a car impacts the pole, you lose that point to point link. Hope you got a failover plan or another set of air fibers that take a different path.

          • borari@lemmy.dbzer0.com
            link
            fedilink
            English
            arrow-up
            1
            ·
            2 months ago

            It is not using token ring protocol. It is a wireless implementation of the Ethernet protocol. I don’t think you fully understand what token ring is, or we’re not doing a good job of explaining what a point-to-point radio is.

              • borari@lemmy.dbzer0.com
                link
                fedilink
                English
                arrow-up
                1
                ·
                2 months ago

                Sure. And if you ran an Ethernet cable between each station, they’re still dependent on the station before it. What point are you trying to make?

                  • borari@lemmy.dbzer0.com
                    link
                    fedilink
                    English
                    arrow-up
                    1
                    ·
                    edit-2
                    2 months ago

                    Yeah, router on a stick is definitely not how anyone sets up home Ethernet.

                    Idk why you’re even mentioning home Ethernet. Most people I know don’t have cameras on electrical poles connected by airFibers inside their homes, that’s solidly enterprise shit.

                    I’ve aligned in the high hundreds, if not low thousands, of pairs of these exact model of radio in my career. I’ve aligned hundreds of Siklu’s that shoot 10Gbs duplex over 2.5-3 fucking miles. Please tell me more about how the wireless backhaul wasn’t Ethernet but was actually token ring.

                    Wind doesn’t make a bit of difference unless you don’t know what you’re doing and you half assed your job, although rain will for sure fuck you. I’m starting to think you’re just repeating things you’ve heard instead of talking about something you have a thorough understanding of.

          • computergeek125@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            2 months ago

            Forgive my ignorance in that case. I did very poorly on the unit that covered token ring, and was in perpetual self doubt because I got an answer wrong when I referenced the original manufacturer document instead of the slides.

            Nothing against the protocol, I just didn’t learn it properly and was born too late to see it in person. (I love learning about all tech)