Rikudou_Sage@lemmings.world to Games@lemmy.worldEnglish · 1 year ago3D printed Portal coastersi.imgur.comexternal-linkmessage-square14fedilinkarrow-up1294arrow-down15file-textcross-posted to: 3dprinting@lemmy.worldgaming@beehaw.org
arrow-up1289arrow-down1external-link3D printed Portal coastersi.imgur.comRikudou_Sage@lemmings.world to Games@lemmy.worldEnglish · 1 year agomessage-square14fedilinkfile-textcross-posted to: 3dprinting@lemmy.worldgaming@beehaw.org
minus-squareJackGreenEarth@lemm.eelinkfedilinkEnglisharrow-up4·1 year agoIs this a dual filament printer, or simply gaps in the material?
minus-squareAdrianTheFrog@lemmy.worldlinkfedilinkEnglisharrow-up6·1 year agoThere is also a technique where you manually swap out the filament at a certain layer height. Based on the shared STL files I think that’s the case here.
minus-squareRikudou_Sage@lemmings.worldOPlinkfedilinkEnglisharrow-up6·1 year agoWhat @AdrianTheFrog@lemmy.world said, I changed the filament in the middle of the print using the M600 command.
Is this a dual filament printer, or simply gaps in the material?
There is also a technique where you manually swap out the filament at a certain layer height. Based on the shared STL files I think that’s the case here.
What @AdrianTheFrog@lemmy.world said, I changed the filament in the middle of the print using the M600 command.