Alan Miller shook and trembled on gurney after becoming second person to be executed by controversial technique

Alabama has carried out the second execution in the US using the controversial method of nitrogen gas, an experimental technique for humans that veterinarians have deemed unacceptable in the US and Europe for the euthanasia of most animals.

Alan Eugene Miller, 59, was pronounced dead on Thursday evening at a south Alabama prison. The lethal method involves being strapped to a gurney, where a respirator mask is applied to the face and pure nitrogen piped in. The resulting oxygen deprivation will cause death by asphyxia.

Miller shook and trembled on the gurney for about two minutes with his body at times pulling against the restraints, followed by about six minutes of gasping breathing, according to the Associated Press.

Miller’s death is the latest in an extraordinary week in the US in which five condemned men in five states are set to be killed over six days. Three prisoners have already been executed – on Friday South Carolina killed Khalil Divine Black Sun Allah in its first execution in 13 years, then on Tuesday Texas killed Travis Mullis and Missouri put to death Marcellus Williams.

  • TallonMetroid@lemmy.world
    link
    fedilink
    English
    arrow-up
    13
    ·
    17 hours ago

    So, this is similar to how lethal injection executions were getting botched because all the people who knew how to do it properly refused to on moral and ethical grounds, and the states decided to push ahead anyway?

    • escapesamsara@lemmings.world
      link
      fedilink
      arrow-up
      9
      ·
      17 hours ago

      Pretty much. Also down to money, the proper way requires a full chamber, plus constant monitoring and replacement of all gasses in said chamber – it can’t be done with just a mask or helmet, that means thousands of liters of nitrogen per second to do it properly.

      • MacAttak8@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        7 hours ago

        We now have 3D printed euthanasia pods for people that elect to do so. First successful case was very recent. I don’t feel that adding some restraints would be a major hurdle.

        If the death penalty unfortunately sticks around, this seems like a humane, cheap way to do so.