I’m taking apart a broken tape recorder produced in the 70s (a Tesla B57, made in Czechoslovakia), to harvest some parts (inductors, switches, …) and maybe reuse the case for some project.

Which made me wonder: are there any dangers to protect myself against? I know about lead, so I’ll take precautions when desoldering things. Is there anything else to be aware of? Some fumes, other toxic materials, …?

I’m not planning to connect the device to power in any way, so from an electrical perspective there should be nothing to worry about (except for caps maybe). Am I wrong?

  • Susan_B_Good@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    Wear trainers not sling backs. Molten solder and your tootsie don’t go well together.
    I turn the printed circuit board component side down and wave a hot air gun over the flip side, whilst tapping the board against the edge of work bench. The result is usually a cascade of components (and blobs of molten solder).

    Very therapeutic. When I’m stuck trying to work out how to do something, when everything I have tried has failed miserably, I deconstruct something electronic. No, I keep well away from psychiatrists.

    You (I anticipate) won’t be doing this 9 hours a day, 7 days a week - most of the nasties are long term exposure ones, so a one-off should be fine. If anything ever irritates your eyes or throat, get out of there and ventilate the place.