Got lazy but have posted once about my Extruder being the reason why Octoprint or Firmware is not starting the Print.

I compiled my Marlin Firmware by adding

#define DEFAULT_Kp 16.44
#define DEFAULT_Ki 1.58
#define DEFAULT_Kd 42.75

and it starts, but it does weirdly extrude. When I hit “Extrude 5mm” Manually while nothing is running then it seems like a nice constant flow, but when Printing it somehow stocks, retracts or smth when trying to print. At first I thought its TPU and a new abstract material I have never touched but this currently is the good old Black PLA from Creality that I always used.

I use Cura and just used the default settings for PLA like always.

  • ReakDuck@lemmy.mlOP
    link
    fedilink
    arrow-up
    1
    ·
    edit-2
    1 year ago

    Great thought. Octoprint for sure doesn’t know the width of the Nozzle so it definetly won’t mean that 10mm would come out of the Nozzle. So I measured the mm on the filament how much moved. It only moved 3mm when I pressed 10mm Extrude in Octoprint.