Hello fellow withprinters. Whats happening here? Stringing is not the problem, if i print string tests, they are good. Its only in holes, the walls wont stick. Any suggestions for a fix?

Edit: Found the problem. The temperature sensor was faulty. Changed it and now everything is fine.

IMG_20231029_185945

IMG_20231029_185931

  • Square Singer@feddit.de
    link
    fedilink
    English
    arrow-up
    3
    arrow-down
    1
    ·
    8 months ago

    But if you enable “Avoid crossing perimeters” this problem will still not occur.

    Since OP mentioned a switch from Marlin to Klipper, it could also be acceleration settings or something like it.