photos will never be pngs unless someone intentionally converts them to that format, as pngs are much worse than jpgs for storing this type of image. pngs are much better for computer generated images, such as screenshots, drawings, etc. you can also losslessly compress pngs with tools like pngcrush without converting them to jpg.
it’s like @Xyre@lemmus.org described. old content does not get federated unless there is new activity on it and someone on your instance is subscribed to the community it happens in.
this isn’t anyone’s fault, it’s just a matter of the instance not being around that long that some historic content will be missing.
delegating authentication to another service.
one of the more commonly known options would be sign in with google, but this is also quite useful for providers hosting multiple services. a provider could host a service that handles authentication and then you only have to login once and will automatically get logged in for their lemmy, xmpp, wiki and other services they might be providing.
verification emails are usually sent immediately. if there are delays you should check your junk folder, and if it’s not there it probably won’t arrive anymore. depending on the instance you signed up on there may be alternative methods to reach out to the instance admins about this. note that private messages from mastodon to lemmy do not work unfortunately.
this isn’t true. it was incorrectly stated in the upgrade guide but has been removed a while ago. it was supposed to be a recommendation due to some issues with postgres 15. there is no postgres upgrade required between 0.19 releases.
account names cannot be changed.
you can only change your display name, which is available in the settings.
whether display names or usernames are shown depends on the interface/client and user settings where available.
the only way to change the username is to create a new account.
it seems to have become more frequent recently.
i’ve been experiencing the same on firefox and i’ve also heard other people report the same on firefox, which happened around the time of the firefox 129 release. i didn’t see anything noteworthy in the release notes though that’d explain this. it seems like it might be related to enhanced tracking protection and cookie isolation.
this is a lemm.ee limitation, not a Lemmy limitation, so this is the wrong community.
if you look at the instance sidebar at https://lemm.ee/ you can see that it’s 4 weeks.
Retaining old content has value
this 100%. this is exactly why i wouldn’t recommend any communities to be removed if there is still content in there, worst case just lock it.
cleaning up communities doesn’t make lemmy more active either. it may help to make active communities stand out more against inactive ones though.
cleaning up dead communities isn’t a great experience as it is today.
admins could purge communities, but this can cause unexpected breakages with other activitypub software that is more strict about cryptographic verification, as purging a community erases all information about it from the local instance, including the cryptographic private key. purging a community also only removes it on the local instance, so other instances would still have a cached (although possibly marked as deleted) copy of it. this would be the only method that frees up the name to allow creating a new community under the same name later on. locally this would also remove all posts and comments associated in that community, but other instances may think that they have users subscribed to the community and may still have posts and comments in there. this also means if a new community is created with the same name again, the local instance will still not know about older posts, but users on other instances might see them still, and the local moderator might be unable to interact with them at all, e.g. to potentially remove old problematic content.
the next option is removing a community as (instance-)moderator action. this will only mark the community as removed without further impact. regular users won’t be able to access the community on the local or any other instance anymore, but its contents are preserved in case it gets restored at a later point in time. the name is not released and there isn’t even an error message shown when trying to create a new community with the same name.
another option could be to “take over” the community and delete it, which is the act of the top community mod deleting the community (not a moderation action). in this case only the same top community moderator can restore it. this behaves mostly the same as removing it.
none of these options are good to use. imo purging should be avoided in any case, and the other options both require admin intervention to release a community later on and have no user feedback in lemmy-ui at this time, at least on 0.19.5.
for communities entirely without posts it is probably ok to just remove them and restore and transfer them if someone requests them. for communities with content the next best thing might be locking the community, potentially locking all posts if it’s just a small number, to prevent unmoderated new content in that community, and put up a pinned post asking people to reach out if they want to take over the community. otherwise, if the community was removed or deleted, all the posts and comments within them would also be taken down with the community.
for sure, but they’re neither mentioned on https://join-lemmy.org/docs/users/02-media.html nor on the linked CommonMark tutorial.
It’s not even just that. It seems that the extra acts as a separator, so you can’t even autocomplete e.g. @threelonmusketeers@sh as that’ll try to autocomplete @sh instead of taking the instance domain as part of the mention.
I’ve raised a GitHub issue for this now: https://github.com/LemmyNet/lemmy-ui/issues/2652
on firefox, if i type @gedal and click or press tab once it replaces the text with [.world](https://lemmy.world/u/gedaliyah) .
the behavior is the same whether i hit tab, enter or click the text.
just as great as lemmy-ui
it does, but only if you use the autocomplete feature. it’s also a bit delayed without any indicator that it’s loading.
if you type @gedal and wait a moment it’ll load @gedaliyah@lemmy.world to be selected:
| if | you | want | to | get | fancy |
|---|---|---|---|---|---|
| you | can | even | use | undocumented | tables |
Except it wasn’t created on lemmy.ml, it was created on lemmy.world.
lemmy.world then informed lemmy.ml that it is intended to be published in the community that it was created for.
It doesn’t say “crossposted from lemmy.world” but “crossposted from canonical_post_url”. This is not wrong in any way, although it might be a bit confusing and could likely be improved by including a reference to the community. The instance domain should for the most part just be a technical detail there.
It should also be noted that this format of crossposting is an implementation detail of Lemmy-UI and other clients may handle it differently (if they’re implementing crossposting in the first place).
I’m not saying it’s technically impossible, although it would likely be a bit challenging to integrate on the technical level, as the community instance has no authority to modify the post itself other than removing it from the community at this point.
The existing fedilink is already present for technical reasons anyway, so this is currently only showing existing data.
Why would you want a lemmy.ml link though? On Lemmy you’re typically intending to stay on your own instance, which many third party apps already implement. For Lemmy UI there is already a feature request to implement this, although it might still take some time to get done. If you have the canonical link to an object (which will always point to the users instance) Lemmy can look up which post/comment you’re referring to in its db without any network calls when it already knows about the entry. If you were linking to the lemmy.ml version of that post then the instance would first have to do a network request to resolve that and then it would realize it’s actually the lemmy.world version that it may or may not know about already.
I’m not familiar with n8n but it’s fairly straightforward on the API side.
You’ll need a session token, also known as JWT, which you can get from logging in.
You typically don’t want to do a login for every post, so you’ll want to store that as a persistent value.
For authentication, you can pass the header
authorization: Bearer {jwt}, with{jwt}being the session token.https://join-lemmy.org/api/classes/LemmyHttp.html contains the API documentation.
You’ll need to figure out the id of the community that you want to post to.
If you need to look it up, you can use getCommunity to fetch its details. Afterwards you can use createPost to submit it.
The
formlinks for the methods explain the request body json values that should be provided.