Sometimes I bulk out my shakshuka with another great pantry staple - lentils. And a little more involved for this thread but mujadara is another great dish that’s primarily pantry ingredients plus onions. But I almost always have onions on hand and they keep so I give them a pass

I felt this way about Risk of Rain 2 and I was proven wrong. I’m willing to wait and see.

I would put Control pretty high on a list of all my favorite games. Phenomenal experience and definitely one of the highlights of games in the last few years

It is double the resolution, because resolution is expressed as an x,y pair. It is 4 times the pixel density for the same screen size.

I watch a lot of educational explainer content and I’ve thought about trying nebula. Who do you watch on there that you think makes it worth it?

I did a lot of that work when I was starting out. Trust me, not a fan anymore than you are. But the developers that buy up all the land and do the construction are, which I hate but understand. What I didn’t understand is that, your average SFDH buyer loves that shit. There were times I was cranking out tweaked designs for 15-20 builds a week across 3-5 neighborhoods. People would come to our company specifically because of that “cookie cutter” design. They loved it and loved paying for it with just a couple tweaks. They knew that there were just tweaked versions of maybe 3 house styles in the entire neighborhood and they loved the suburb feel. Me personally? I’ve always hated the suburb vibe since I was a kid but that’s what paid the bills until I could go back to school and get something I cared about off the ground

I am an architect and I do a lot of ai work. My specialty is actually in generative parametric design and I’m just taking a break from writing some code for an AI project I am working on.

I’m seeing a lot of bad takes here, I’m assuming from a mixture of not reading the article and not knowing what actually goes on in the field. No, we don’t just make pretty pictures. No, a trend you don’t like of boring or shitty buildings you’ve seen doesn’t mean the profession is dying (and for a lot of those you can look at developers to share the brunt of your and my irritation).

People working as “architects” do a huge variety of work and no two you talk to are going to have the same workflow or process so I cant speak for everyone. For me, ai tools aren’t ever going to take my job, just remove more time consuming tasks and, in the long run, increase complexity and expectations. Same as when we moved from hand drafting to CAD, and again when we moved to 3D BIM design.

Each step drastically reduced busy work but over time increased the base level complexity in the design work. When architecture was all analogue, we weren’t doing statics modeling and parametric studies. And now with BIM, I have to consider and model equipment and MEC feasibility. Even compared to a couple years ago, now I’m doing solar and environmental modeling to track energy performance and inform the designs and suggest changes early on.

There was a doctorate researcher I spoke with recently that mentioned that the direction the profession is going is that we will no longer make individual choices for every design element. Instead, we will manipulate the data and direction that end up at the final choice. And I think he’s right. I think in the last year I’ve hand modeled maybe one project? Everything else has been purely data driven generative design.

I use AI image generators to do early design inspiration alongside sketching. I have a local Stable Diffusion AI instance trained on my wireframe modeling that I use to create scenes for presentations faster. I build small tools that help me recursively optimize structural elements. The last few months I’ve been working on my own big AI project that could really help a lot of my peers as it develops, too. I can’t talk about it just yet but I will after the funding period ends. The future is looking bright.

Tldr: the whole field of architecture isn’t responsible for those shitty city apartments you don’t like, AI tools are helping us because architecture is much more data driven and complex than you think it is, architecture isn’t a struggling or dying field like the article quotes- what’s killing the joy is greedy cheap developers.

Happy to chat or answer questions

Check out The Blacktongue Thief if you enjoy fantasy. It’s narrated by the author and he is very talented. I enjoyed the book itself very much but I think the audio performance is half the fun, since he knows exactly how every line is intended to be conveyed.

Can someone check and let me know if it supports marking read on scroll like Sync for Reddit did and Voyager does?

Oh the live action movies? I actually haven’t seen those but I’m not surprised they cut a lot of that out.

Yeah there’s a good amount of sexual / rapey stuff in the anime and manga, specifically around Kishimoto. Also I’m not sure where the movies stop but the manga that goes past the anime gets really, really weird.

I still really like it a lot but you have to be willing to look past that stuff so I don’t recommend it often to people who aren’t already familiar with some anime. The movies look a lot more approachable though.

GANTZ is really good but I don’t think I’d recommend it as an early sci-fi anime watch. There’s a lot of weird sexual stuff in it that the others on your list don’t have that I think make them a better recommendation.

I also really like .hack//SIGN to throw my own in

The other reason, also related to military, is that a couple of months ago the FAA integrated their records system with the VA. Because of some records disparities, specifically health records, thousands of pilots have had their license suspended. This happened to someone I know and they got all their documentation to the FAA in early April and as of 2 weeks ago they were told to expect 3-5 more months of a wait before it’s reviewed because they’re so bogged down

I’m not super familiar with humidex, I was going to suggest taking a look at how your values fit into a psychometric chart but it’d probably be more trouble than it’s worth, especially if you just have a single window unit. Your humidity is just going to dump every time the unit kicks on to drop the temp anyways

An easy thing you could automate would be to include time schedules as well as better temp ranges. Most of your cycling is from 1800-0600 (is this chart time offset? I don’t get why so much of your external heat gain is overnight). So you could avoid some of that by precooling below your set temp beforehand. I was going to suggest doing this at night, which is also when power prices are usually lower, but again it looks like it gets hotter outside at night so I’m not sure.

Regardless, before these periods of heat gain run the ac in a continuous cycle a few degrees below your comfort zone, which will also dehumidify the air more, extending your comfort zone time during heat gain without cycling

Have you ever checked out OrangePi? I was considering them before picking up a jetson nano. It’s crazy to think that a rpi4b is going for the same price from resellers as a jetson with cuda and tenserflow support.

That’s because the Deathloop exclusivity period on PlayStation and PC was set before the acquisition and they had to honor existing contracts. It’s not indicative of a pattern they’re going to follow

A additional concern with resin printers is VOCs, Volatile Organic Compounds, which air purifiers don’t really filter out since they’re focused on particulate cleaning. Sadly there is no solution like dilution, or in this case ventilation

I really enjoyed Project Hail Mary, just couldn’t put it down and it is similar enough to OP’s prompt to recommend to them.

It’s not a book but if you enjoyed Project Hail Mary you might enjoy For All Mankind on Apple TV. It has a similar vibe of engineers and tech driving the plot balanced with looking at the human costs of a rapidly advancing space program both on and off Earth

Copy/paste mostly from another reply I made:

I have a huge audiobook library, I was fully prepared to do all the processes to move and organize my mess of a library to get it working with Plex. I’m sure you’ve seen the GitHub guide floating around.

But when it came time to sit down and configure my server for audiobooks, ebooks, tv, movies, and music, I found that audiobookshelf just did a way better job with less of a headache. My current stack is Beet.io with audible support to move my already downloaded library into a better folder and naming structure. Once I get those all finished I won’t have to use this step. This gets stuff about ~80% of the way there except when the source is really messed up.

From there I have Readarr looking at the Beets destination folder and managing downloads. This is pretty good for getting most of the rest of the info with some clean up and is similar to setting up other Arrs. Then audiobookshelf for final tweaks and browsing/downloading.

It’s quite a pain to ingest an initial large library but for new downloads it’s been pretty seamless. Way easier and more consistent than having to do most of this anyway plus fight with Plex.

The audiobookshelf library is really great and can pull audiobook specific information from a lot of sources automatically. You can browse by series or narrator or genre too and if you listen through their app or through the browser it syncs your progress which is nice.

The audiobookshelf app is pretty good for browsing and downloading but I don’t like the player as much as my usual one. But you can just point the download at whatever folder your favorite player uses.

Since you’re already using Plex for audiobooks you can probably skip all these steps straight to audiobookshelf if your folder structure already matches

I have a huge audiobook library, I was fully prepared to do all the processes to move and organize my mess of a library to get it working with Plex. I’m sure you’ve seen the GitHub guide floating around.

But when it came time to sit down and configure my server for audiobooks, ebooks, tv, movies, and music, I found that audiobookshelf just did a way better job with less of a headache. My current stack is Beet.io with audible support to move my already downloaded library into a better folder and naming structure. Once I get those all finished I won’t have to use this step. This gets stuff about ~80% of the way there except when the source is really messed up.

From there I have Readarr looking at the Beets destination folder and managing downloads. This is pretty good for getting most of the rest of the info with some clean up and is similar to setting up other Arrs. Then audiobookshelf for final tweaks and browsing/downloading.

It’s quite a pain to ingest an initial large library but for new downloads it’s been pretty seamless. Way easier and more consistent than having to do most of this anyway plus fight with Plex. I do still want them to add support, though.

The audiobookshelf app is pretty good for browsing and downloading but I think the player is way worse than Smart Audiobook Player. But what I do is just use the audiobookshelf app to download the books to Smart’s library folder and then use the best player app for listening.