Your PC is an unused server.

Also the last democratic presidency has sucked a lot less corporate than previously.

This is one of those situations when you just nod and take the endorsement.

While true for the component itself, there’s material difference for any caps surrounding it. Sure the chipset would work fine at 40, 50, 70°C. However electrolytic capacitors lifespan is halved with every 10°C temperature increase. From a brief search it seems solid caps also crap out much faster at higher temps but can outlast electrolytic at lower temps. This is a consideration for a long lifespan system. The one in my case is expected to operate till 2032 or beyond.

I don’t think other components degrade in any significant fashion whether they run at 40 or 60°C.

Unfortunately I didn’t take before/after measurements but this thick plastic sheet cannot be good for the chipset thermals. 🥲

Huh, interesting. I had no idea. Well I don’t need it to be anywhere faster than 100M. USB2 can definitely do that. Closer to 200M. With that said, the latency is more important if you’re gonna do anything like Steam Link.

Found the GNOME developer.

Ads? I thought the Shield didn’t have any…

It’s a Chromecast with Google TV (CCwGTV) wich itself is a dongle. It’s connected to a Plugable USB-C PD hub - another dongle. The white bit sticking to the left from the hub is a TP-Link UE300 Ethernet adapter - yet another dongle. Finally there’s an SD card inserted in the Plugable hub as well as an HDMI coupler hooked to the other end of the CCwGTV which allows connecting an HDMI cable to it.

I’ve been thinking about Shield TV but I hear it’s not great with updates.

It is. I just wish it wasn’t this expensive. Will have to live with it for a while. 😅

So generally Pegatron. :D I used to buy GB because it was made in Taiwan when ASUS became Pegatron and went to China. Their quality decreased. GB used to put high quality components on their boards in comparison. But now GB is also made somewhere in the PRC. I’ve no idea where MSI are in terms of quality. We used to make fun of them using the worst capacitors back in the 90s/00s. Looking at their Newegg reviews, their 1-star ratings seem lower proportion compared to Pegatron brands and GB. Maybe they’re nicer these days? The X570 replacement I got for this machine is an ASUS - “TUF” 🙄

Signature Plastics G20

They feel a bit like a mix between DSA and laptop keycaps.

What do you buy?

I think I found the source of the liquid @abcdqfr@lemmy.world. The thermal pad under the VRM heatsink has begun to liquefy into oily substance. This substance appears to have gone to the underside of the board through the vias around the VRM and discolored itself.

Some rubbing with isopropyl alcohol and it’s almost gone:

Perhaps there’s still life left in this board if used with an older chip.

I think the board has reached the end of the road. 😅

Hard to say. She’s been in 24/7 service since 2017. Never had stability issues and I’ve tested it with Prime95 plenty of times upon upgrades. Last week I ran a Llama model and the computer froze hard. Even holding the power button wouldn’t turn it off. Did the PSU power flip, came back up. Prime95 stable. Llama -> rip. Perhaps it’s been cooked for a while and only trips by this workload. She’s an old board, a Gigabyte with B350 running a 5950X (for a couple of years), so it’s not super surprising that the power section has been a bit overused. 😅 Replacing with an X570 as we speak.

Funny enough, I can’t detect the smell from hell. Could be COVID.

Iiinteresting. I’m on the larger AB350-Gaming 3 and it’s got REV: 1.0 printed on it. No problems with the 5950X so far. 🤐 Either sheer luck or there could have been updated units before they officially changed the rev marking.

I am slightly offended by other people believing in God but I generally keep it to myself. 😂