• SchmidtGenetics@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    3
    ·
    3 hours ago

    They could just shift the frequency up and down so they can get data in those ranges. There’s advantages to them being linked together and being able to communicate with them. They could probably also Shut down those bands completely temporarily so some science can get done.

    I get this is a HUGE issue, but this also isn’t this massive non accountable issue to get some science done. Just makes it harder, these embellished headlines don’t help stuff.

    • UFO64@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      2
      ·
      1 hour ago

      They cannot simply shift them. There are huge regulatory machines that would need to approve such an event. At most they could cut off using some of their band and use less of it, but that comes at the cost of customer service.

      A satellite passing over your head will travel about 4,500KM from horizon to horizon (assuming low earth orbit). Turning off the radios over that span of distance would mean entire countries don’t get starlink traffic any time a radio telescope needs that band, and my suspicion is they need them often.

      Honestly, we need to get more of these things off earth to continue this sort of research.

      • SchmidtGenetics@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        53 minutes ago

        What? The bands already have a range, they don’t stay static on a single frequency in that band because of overloading, but if it needs to be done for periods of a time, there’s no issue with that. The band already cycles, what regulatory “machines” are involved? Stay at the top end, and then the bottom end for a bit. Put the cycle on a schedule instead of having all active at once.

        And no they wouldn’t lose internet, there’s multiple bands and frequencies for that exact reason. If ones congested, it shifts to another less congested and cycles that way.

        Using the light and laser example shift the red light to oranger and get some data, shift it to bluer and get the other. You can also shift the laser a little to get get more data on either side of that.

        Light, like radio has fluctuations you can take advantage of to read between the lines.