• jbk@discuss.tchncs.de
    link
    fedilink
    arrow-up
    1
    arrow-down
    1
    ·
    24 days ago

    maybe it’s just not possible with the current (probably ancient to not break older devices) protocols

      • ChaoticNeutralCzech@feddit.org
        link
        fedilink
        English
        arrow-up
        5
        ·
        24 days ago

        You’re practically right but…

        Since 3.5mm jacks with insertion leaf switches are larger, the audio chips instead check for approx. 32 Ω of impedance on the audio channels, or connection between the first two pins (MIC and GND), which doubles as button press detection (some phones, including every Samsung one, check for several resistance levels, allowing for separate ⏮⏭ buttons rather than just the multipurpose ⏯). This makes sure that (high-impedance) line-in devices whose plugs bridge the first 2 pins get detected (as a side effect, your headset with mic and 1 button will only show up with the micless icon if you hold the button while plugging it in).

        Therefore, phones do detect line-level devices vs headphones or aux-in ones (or at least have hardware to do so) but other than perhaps some EQ and level adjuatment in the DAC, there is no effect.

      • Hildegarde@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        22 days ago

        Phones don’t do it with USB audio devices which are digital devices with unique identification.

        Its not the hardware, its the software.